A PRESSURE HOLD BLAST & RECOVERY SYSTEM ENGINEERED FOR HIGH-PRODUCTION SURFACE PREPARATION. The Schmidt IBRS is a skid mounted abrasive blast and recovery system capable of using a wide range of abrasive media that reclaims and classifies the abrasive for reuse.
The IBRS gives you a blast room setup without building a blast room. Install it alongside an existing structure, connect air and power, add an abrasive reclaim trough (above ground or inground), and you have a complete blast and recovery operation, at a fraction of the cost of blast room construction.
The IBRS can be installed in a wide variety of facilities.
Share:
Blast Controls : 1-1/2” Thompson Valve II or Tera with automatic air valve. Pneumatic or Electric deadman controls with ComboValve blowdown. Standard single outlet; upgradeable to two outlets (10 CF and 20 CF variants).
Integrated Storage Hopper & Reclaimer : Integrated abrasive storage hopper mounted above the blast vessel that automatically recharges the blast vessel by gravity when depressurized (approximately 3-minute transfer time). Two-stage air wash reclaimer with cyclonic action and adjustable air wash for optimizing dust removal vs. media retention. Vibrating screen catches paint chips and debris before abrasive reaches the blast vessel. Access via upper hopper door and lower hopper door for inspection and cleaning.
Dust Collector : Two or Four-cartridge design with pleated filter elements accessible through hinged door. Automatic 120 VAC pulse jet controls with Magnehelic gauge for filter sensing. Butterfly valve for accumulated dust drainage.
Blower & Electrical : 10 HP electric centrifugal blower. 460 VAC,. 120 VAC for automatic pulse timer board. 12 VDC for blast controls.
